Hey Guys,
I have a twin strommie setup. It has a linkage between the 2 with like a D-shaped bit on each end (technical enough for ya). Apparently the D bits r flogged.
Does anyone have such an item for sale or can u get new linkages anywhere?
I have a pic but of course I still haven't been able to get them to post. I might send it via Craig A which is apparently the preferred method for technophobes.
Thanks Guys
Matt F
if there is a mini parts shop near you try them as they always stock jouners for twin SU's which will often fit other shafts
Here is the photo Emu spoke about.
Regards,
Craig (loyal and committed subject of King Emu)
What a genius you are Craig!
Well fellas, see what I mean?
Both about Craig and the linkage?
I don't want to appear  ignorant Nicko (I know that will draw comment from the Kiwi!), but a mini parts store is either a store where they sell parts for minis or a small parts store, or possibly both.
Is this a linkage that one would pick up at  autobarn or repco?
Ta
Matt F
hey since when was emu made a king!!!!!!!!!
HE MORE A QUEEN THAN A KING !!!!!!!!!!!
Just stick to the topic Kiwi!!
Ya never seem me hijacking your serious discussions with frivilous banter.
Emu - never frivilous banterer
EMU...they are available at www.americanautos.com.au
I even bought 2 sets for my Triple Strombergs.....only difference, is that the Triples have longer shafts, ( I just cut them down to size ).
Cheap as chips too....about $20 odd !
Cheers
Mark
Emu,
I used to buy parts off these guys in Sydney http://www.carburettorservice.com.au/ Might be worth a ring.
Cheers,
Craig. (Defender of Bondi and Flightless Birds)
Hey thanks guys,
Excellent info.
I'll post how I go for others to follow.
Matt F
Hi EMU,
Speco sell a after market clip called a "W" clip that do the same job I have used them to set up my tripple strommies.
Rare Spares have them listed as well, part number 221140 for 5/16" shafts they sell for $12.oo for a pair with bolts and nuts.
Hope this helps,
Steve.