|
Title: Information on HR Wheels required please Post by: conaghan11 on January 11, 2004, 01:36:09 PM hello all,
I remember seeing some detailed discussion on this Board somewhere regarding the differences between the different steel wheels available for early holdens (HR's specifically). From memory, this discussion covered many aspects including deep / shallow dish, identification "holes" and availability in the Brisbane area. For the life of me I cannot find the thread any more. I have searched the different Boards and used the obvious key words but cannot find where the discussion was. Could some kind soul please help with a pointer to the information or provide me with details of how to identify deep dish wheels and where they are available from in Brisbane. Thankyou in anticipation. Steve C. Title: Re: Information on HR Wheels required please Post by: RET on January 12, 2004, 01:52:34 AM I think this one is the topic you're looking for.
http://www.fefcholden.org.au/cgi-bin/yabb/YaBB.cgi?board=howto;action=display;num=1054092059 As a tip, the default setting for a search is only 7 days. If you change this to 700 you'll get results going back two years. cheers RET Title: Re: Information on HR Wheels required please Post by: conaghan11 on January 13, 2004, 10:51:15 AM Thanks "RET", yep, that's exactly what I was looking for.
Steve C. |