Print Page - TUNING A 350 HOLLEY

Title: TUNING A 350 HOLLEY
Post by: FC2104 on December 06, 2003, 05:13:57 AM

Hello all
When you look at a 350 holley on the manifold there are 2 mixture screws on each side of the carby .Which is the primary mixture screw and which is the secondary.
What would you recommend for a jet size for 186 with head work and xu1 cam extractors etc...
Dean

Title: Re: TUNING A 350 HOLLEY
Post by: craiga on December 06, 2003, 06:00:08 AM

Dean,

Check this out http://www.chevyhiperformance.com/howto/45638/

It desribes the tuning procedure pretty well.

Cheers,

Craig

Title: Re: TUNING A 350 HOLLEY
Post by: nicko on December 06, 2003, 07:29:23 AM

thanks Craig,thats the best description ive seen on tuning a holley as most are hi tech with no photos ,or not enough photo's,ive book marked it for later use,i have 3 holley books and none of them have that much detail in an easy to use format

Title: Re: TUNING A 350 HOLLEY
Post by: FC2104 on December 06, 2003, 07:58:38 AM

Thanx Craig
that is going to help me alot
Dean ;)

Title: Re: TUNING A 350 HOLLEY
Post by: normd on December 06, 2003, 03:30:02 PM

Thanks Craig
This will be heaps of help as Dads car (shhh XB 302) has a Holley , great for future reference

Norm

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: FC2104 on December 06, 2003, 05:13:57 AM