|
Title: Windscreen Wiper Bezels (Pivot Shaft Spacers) Post by: Jolls on April 09, 2025, 10:21:35 PM Hi Team,
I would like to clarify what I have read in relation to the Pivot Shaft Spacers (Windscreen Wiper Bezels). In the reference it refers to the Bezels having the grub screw for the nozzle being on the outside. This would make them handed; ie opposite sides depending on it being suited for driver's or passenger's side. The FB version has the locator at the 2 O'clock position and grub screws on both sides so they can be configured how you want. The FE FC ones only have the one grub screw. The limted number of photographs I have seen show all of the FE FC Bezels having the grub screw on the same side. The set I have are the the same configuration. Can someone please confirm for me if the FE FC Bezels are the same both sides (ie grub screw facing the passenger side) or if the passenger and driver's sides are different. Cheers Jolls Title: Re: Windscreen Wiper Bezels (Pivot Shaft Spacers) Post by: Harv on April 10, 2025, 02:28:21 AM The Masterparts catalogue only shows one part number for the FE/FC pivot shaft spacers (7413862), so methinks they are not left-hand and right-hand.
Cheers, Harv Title: Re: Windscreen Wiper Bezels (Pivot Shaft Spacers) Post by: Jolls on April 10, 2025, 08:00:30 AM Harv,
You are a gem. Thank you so much for that. I didn't event think to look there. So now it is just a matter of finding some 1/8" brass pipe and doing the repair. I think JB Waterweld should do the trick! Title: Re: Windscreen Wiper Bezels (Pivot Shaft Spacers) Post by: fcute on April 11, 2025, 12:10:13 AM I did the exact same thing, I bought my pipe from the local R/C hobby shop.
|