Hi all
I'm after 2 stabilizing bar conecting bolts for the FC as mine have rusted with one having no thread at at all on on end.
In the workshop manual they are called " Stud - Front Stabilizer Spacer " . They bolt the stabilizer bar to the lower control arm .
FB and EK seem to be the same so that would work as well.
I know that I can get after market generic bolts but I'm trying to keep the car as original as possible .
Thanks Brad
The nearest easy replacement is the Rare Spares stabilizer bar stud and rubber kit (FE-HG). The only difference is that the stabilizer bar stud is a smaller diameter forging, rather than the machined type that FE-FCs had.
If you want to go really really stock, you'd have to take your broken stud to a machine shop and get them to machine you a new pair out of the right size round bar.
Rob
Hi Brad,
Can you supply a pic of what you are after. I don't know but I may have what you are looking for. Send it to my phone 0412 282 282
Regards Brett
Thanks for the quick replies but I showed it to a mate yesterday arvo and he tooled two up on his lathe while we had a couple of cold ones. ;D
Old mates ay , worth there weight in gold.
Thanks again Brad.