Print Page - Rotiserie for FC ute wanted-Adelaide SA

Title: Rotiserie for FC ute wanted-Adelaide SA
Post by: Captainwaldopepper on December 05, 2020, 06:35:02 PM

Just started the restoration of my FC ute.
Has anyone around Adelaide got one they don't use anymore?

Title: Re: Rotiserie for FC ute wanted-Adelaide SA
Post by: JB on December 06, 2020, 02:50:12 PM

I built one out of 2 engine stands... a lot cheaper than a purchased one... worked a treat!

Title: Re: Rotiserie for FC ute wanted-Adelaide SA
Post by: Errol62 on December 07, 2020, 05:21:13 PM

Did the same. Two heavy duty engine stands, extended height and fixed together with two lengths 2â€ pipe welded to bases after the body was mounted.

Sent from my iPad using Tapatalk

Title: Re: Rotiserie for FC ute wanted-Adelaide SA
Post by: Captainwaldopepper on December 11, 2020, 09:13:30 AM

Thanks guys-I've seen a few made up using two engine mounts.
I'll knock one of these up. :)
Cheers
Dave

Title: Re: Rotiserie for FC ute wanted-Adelaide SA
Post by: JB on December 11, 2020, 11:17:03 AM

Just a heads up, the centre of gravity on a ute is at the level of the tray. I worked this out the hard way lol.

Cheers
JB
(https://i.postimg.cc/9whg35SM/BBBB078-A-4527-4-B0-D-A087-00989-C4-DC198-1-105-c.jpg) (https://postimg.cc/9whg35SM)

Title: Re: Rotiserie for FC ute wanted-Adelaide SA
Post by: Captainwaldopepper on December 11, 2020, 04:35:41 PM

Thanks JB-handy to know before I start!!

FE-FC Holden Discussion Forum

For Sale and Wanted => Other Stuff Wanted => Topic started by: Captainwaldopepper on December 05, 2020, 06:35:02 PM