Text only
|
Text with Images
FE-FC Holden Discussion Forum
Technical Board => General Technical => Topic started by: Dave Lakin (Davo Lako) on July 23, 2020, 01:50:49 PM
Title:
Stainless steel braided hose for fuel lines ... what size?
Post by:
Dave Lakin (Davo Lako)
on
July 23, 2020, 01:50:49 PM
I am making up fuel lines for twin carbies ... 5, 6, 8 or 10 AN?
Thanks in advance.
Title:
Re: Stainless steel braided hose for fuel lines ... what size?
Post by:
Dr_Terry
on
July 24, 2020, 07:51:13 AM
AN6 will be fine, unless you're running a big hp V8 or turbocharger.
It is unlikely you will find AN5 in that type of hose.
Dr Terry
Title:
Re: Stainless steel braided hose for fuel lines ... what size?
Post by:
Dave Lakin (Davo Lako)
on
July 24, 2020, 02:04:54 PM
Thanks Doc ... AN 6 then.
Text only
|
Text with Images