Hi all has anyone used an aftermarket wiring harness in their FE or FC.
If so can you advise on brand, ease of installation and supplier.
Thanks
Mal
I haven’t yet but vintage wiring in Melbourne comes highly recommended at around $750. You might be better off with a more street car type though considering the mods you’re doing, like a painless wiring or similar kit.
Sent from my iPad using Tapatalk
Agree with Errol, if your going stock, then vintage wiring. But for anything else just treat it like a hot rod and start from scratch. The painless kits are totally colour coded and labelled and can cater for any modification.