G'day all,
Had an oops moment trying to wind the back window down...
Any thoughts on the best way to re-attach this piece?
(https://i.postimg.cc/9RgdHJGr/IMG-20191214-135134.jpg) (https://postimg.cc/9RgdHJGr)
Cheers, Graeme
Safest way would be to take the runner off the glass and weld it back in place, then glue it back on with Sikaflex. If you get stuck let me know what side it is. I think I have a few spares.
Jim
G'day Jim,
I took the runner off the glass and it is a little rusty on the base so I not sure whether welding will be any good. The window in the passenger rear...
Cheers, Graeme
Graeme
will have a look tomorrow should have one
greg ( fcwagoon )
Thanks Greg, I will come for a drive if you have one, it must be my turn to call in at your place....
If you don’t have any luck with Greg, let me know and I’ll see what I have.
Jim
Will do Jim, thanks very much.
Jim ..While your doing a parts search ,have a look for chrome tail light surround ,for me ..ring a bell ???
If you have one or a selection you could bring with you when you come to put screens in ,and if your really good i'll stir your coffee with a clean spoon instead of a screwdriver with sealant on it ..cheers Vern ..
graeme
sent you a message on your phone
greg
I lost your message on the phone Greg, can you send it again. Cheers, Graeme