Hi all, finally getting the FE happening. Does any one know if FJ rubber the same profile as a early 56 FE rubber. Mine is the thin chrome and I don't think the rubber is available for the Special with the thin chrome.
Sent from my iPad using Tapatalk
They are different, the FJ rubbers are a “H†section, which means they fit over the body and the screen then fits into the rubber. The FE is an “S†section, which needs both the screen and rubber as well as the moulds to be all fitted together then installed as a complete unit. The FJ screens are smaller than the opening in the body and the FE screen is larger.
Hope this helps.
Thank you for that. I will just have to go standard would had been good to keep the thing chrome Thanks again
If you want to have the chrome, get the special rubber and use the large FE/FC moulds. I might have a spare set if you want to go that way.
I think I would prefer to keep the chrome. Be happy to purchase chrome off you if you want to part with it. Thanks.
The club still has a few new standard rear screen rubbers left. Let me know if you need one.
Ken
Thanks Ken will let you know still thinking may go the larger chrome if I can find some.
If you can pick up from Torquay Vic I have spare rear window and chrome, will swap for VB :)
sgomachen at hotmail dot com
Cheers George.
Sorry mate, I only have a set for my sedan.
Jim
Thanks Jim for looking, no worries.
Sent from my iPad using Tapatalk
Thank you guys for your help, picked up stainless from George (thanks) and new standard rubber from Rares. Just have to search for one stainless joiner. Another piece of the jigsaw nearly done!!!
Don’t want to put a spanner in the works, but if you purchased a standard rubber there is no slot for the stainless moulds to fit into. You need a special rubber.
Jim
Hi Jim my mistake I didn't mean to type standard I did purchase a special. Just my old man brain can't think of two things at once, just as my wife keeps telling me.
Sent from my iPad using Tapatalk
Can relate to that, I get told all the time. She wants to know why I persist with rebuilding mine, I keep telling her it keeps me sane.
I would have a pair of the stainless joiners for the screen trim.
Ken
That is great Ken. I only need one but more than happy to purchase from you one or the pair. (https://uploads.tapatalk-cdn.com/20190402/0f478c16f36c207b7b37dd7b4baa27f6.jpg)
Sent from my iPhone using Tapatalk
Fantastic Ken thank you for message hope you received my reply. I'm a bit dodgy on the iPad!
Sent from my iPad using Tapatalk
Is that 2 pack or Acrylic?
Cheers,
Graham
It’s done in 2 pac Graham but the painter works some magic to bring back to acrylic look.
Sent from my iPhone using Tapatalk