Ladies and gents,
It seems that there is still some demand from people wanting the cylinder head gaskets, so I will do another round (I've had 250 made so far). Same deal as the last two times:
http://forum.fefcholden.club/index.php?topic=27187.0
Rough timing for the process:
a) I'll collect expressions of interest from these forum posts. I need at least 50 nominations to make a gasket run. Not sure how long it will take to get 50 nominations - please be patient.
b) Once we have 50 nominations, tor those who express an interest, you get a month to pony up the funds to me. First time round I only had two guys who didn't bother paying, last time round only one late payer.
c) I'll place the order, and AA Gaskets will let us know the timing.
d) When the gaskets arrive, I'll parcel them up in plywood (like last time) and send them to you. Note that it is cheaper if you combine postage with a few mates, or as a Club.
Cheers,
Harv (deputy apprentice gasket scraper).
Hello Harv, Would you put me down for 2 please.
Thank you,
Peter ACT FE.
I’ll take 6 Harv
Cheers
Frank
hello harv, i will have 3 please
thanks
We now have 25 orders - half way to the 50 we need to put an order in.
Cheers,
Harv
Quick update. I now have nominations for 27 gaskets. Assuming I'm stupid enough to buy 10 (for the latecomers), I still need another 13 orders to meet the 50 units required for a production run.
Cheers,
Harv
I'd like 2 please Harv.
Cheers Rob
Hi Harv
Please put me down for 2, my email is wjaltmann@gmail.com
Cheers Jim
Harv,
Up to what size bore are the gaskets suitable for?
regards
Weddo.
G'day Weddo,
I am not sure of the maximum bore size. The gaskets are based off the AA Gaskets standard grey motor gasket. Because the gasket bore holes are a funky shape (to match the head), it is difficult to work it out by measuring. I've send a question to AA Gaskets, and will post the answer here once they respond.
Ladies and gents,
We now have enough gasket nominations to make an order. My aim is to place the order on Friday, 19th July.
If I have not received your nomination by then, you will have missed the boat.
I will finalise the pricing (should be very similar to the last two batches) and contact nominees shortly.
Cheers,
Harv
Hi Harv,
I'll have 2 please. (For my kids when they own my car.
Mal.
G'day Harv,
I'll have 4 gaskets. Thanks. ;)
ACE 8)
Hi Harv,
Better late than never I suppose.
Could I reserve 2 please?
Thanks,
Prof.
Hi guy’s, I’ve fitted the gasket to my rebuilt engine which is 3&3/16†bore with no problems.
Jim
Hi Harv,
While I haven't used any from the first batch, what the heck another one may come in handy one day.
Could you please put me down for one gasket thank you.
Cheers
Rod
Still waiting for a response from AA gaskets. I took some rough measurements yesterday with a set of verniers whilst fitting one of the new gaskets to the FB. Hard to tell, as the gasket bore hole is not round, and my hands/eyes are not particularly steady. I reckon it is good for at least 3 7/32" bore. Will see what AA gaskets comes back with though.
Cheers,
Harv
Ladies and gents,
AA Gaskets have confirmed that the gaskets are good for a bore which is 3 1/16†plus 60 thou oversize.
I have the following orders for gaskets:
FX/FJ forum
CarlFC (6 gaskets)
Richard Fox (4 gaskets)
Alfihar (5 gaskets)
Loz (2 gaskets)
Spanners (2 gaskets)
Vanmatt (2 gaskets)
Huss52 (2 gaskets)
FE/FC forum
PETEACTFE (2 gaskets)
FX1975 (6 gaskets)
KFV888 (3 gaskets)
Robbo (2 gaskets)
FC0058 (2 gaskets)
MalFE (2 gaskets)
ACE (4 gaskets)
Professor Grey (2 gaskets)
Rod (1 gasket)
Total 47 gaskets
Pricing will be as follows:
a) Gasket: $43 per gasket.
b) Packaging (7mm ply): $3 regardless of the number of gaskets ordered.
c) Postage: $25 regardless of the number of gaskets ordered.
So if you want one gasket, you owe me $71.
If you want two gaskets, you owe me $114.
If you want three gaskets, you owe me $157
If you want four gaskets, you owe me $200
If you want five gaskets, you owe me $243
If you want six gaskets, you owe me $286
I will send each of you a PM over the next day or so, including means to pay me. Payment is due by Wednesday 14th August (3 weeks from now). Once I receive the gaskets from AA Gaskets I will package them up, include the instruction sheets and mail them to you. Note that like the last two batches these gaskets do not come with warranty from either me or AA Gaskets.
Cheers,
Harv (deputy apprentice gasket scraper).
Ladies and gents,
I have placed the order with AA Gaskets, and the gaskets are being produced as we speak. Should have an ETA shortly. Still need payment (and mailing addresses) from the following people in the next fortnight please:
CarlFC (6 gaskets)
Loz (2 gaskets)
Spanners (2 gaskets)
Huss52 (2 gaskets)
FX1975 (6 gaskets)
KFV888 (3 gaskets)
Robbo (2 gaskets)
FC0058 (2 gaskets)
MalFE (2 gaskets)
Professor Grey (2 gaskets)
Cheers,
Harv
Ladies and Gents,
I've received a mystery PayPal payment from one of you. It was for two gaskets ($114), was sent on the 3rd of August, and used Gary Adams PayPal account. There was no other detail on the PayPal transaction, and I'm not sure what forum user this is. If it is your payment, please let me know. To stop someone claiming the payment illegally, you will need to confirm the email address that was used.
Cheers,
Harv
Ladies and gents,
I have received payment for 35 of the gaskets (with thanks), though am out of pocket still for 13. I need funds urgently please from the following people:
CarlFC (6 gaskets)
KFV888 (3 gaskets)
Robbo (2 gaskets)
FC0058 (2 gaskets)
Gaskets have been manufactured, and are ready to send to me. I’m currently on the road for work, so the plan is to receive them when I get home, and have them into the post around the 26th of August.
Cheers,
Harv
Thanks Harv,
payment sent :)
Cheers Robbo
A quick update. The gaskets have been delivered to my place. I have received payment from everyone except CarlFC, and Robbo whose PayPal transfer has not come through yet. Plan is to get myself home this weekend, and start packaging up. Aiming to have them in the post for you next Wednesday or Thursday.
If there is anyone who still wants one, please let me know. I bought a few spares for the latecomers (there is always a few). I will sell off any unpaid gaskets at the end of the month to recover my costs.
Cheers,
Harv
All the gaskets have now been parcelled up, and posted out. Each of you have a PM with your tracking number. All up, I ended up with only one leftover gasket.
Cheers,
Harv
Evening Harv,
The Head Gaskets arrived this afternoon to the workshop in Canberra.
Very secure in your packaging.
Thanks Harv for all your time and effort.
I can’t wait to give them a go!
Peter Y
No problem. Happy to help.
Cheers,
Harv
We will be driving over from Perth (again) for the 2020 nationals at Wangaratta in our FE , it will be a good test for the new head gasket, as with previous trips it can still get quite warm out there.around the end of March . Results so far , since it has been fitted are very encouraging. Temps between the head & the top tank are only maybe 1 to 3 deg difference. Where as before up to 8 deg difference. & a big thank you to Harve for that . Cheers .
The thanks for the gaskets goes to Rob. I just did the monkey work getting them made. He did all the science to prove they really work, and poneyed up the sample.
Cheers,
Harv
You are too modest Harv
Sent from my iPad using Tapatalk