Print Page - Boot Rubber

Title: Boot Rubber
Post by: Ken's 57 on July 02, 2018, 04:25:09 PM

Finally getting around to fitting a new boot lid rubber to the FE.
A fairly dumb question :P....but which way does the rubber go?
Top flap facing inwards as in right hand guard picture or outwards as per the left hand guard??
Judging by the existing well worn original I'm thinking as in the R/H side.
Thanks for any advice.
Cheers, Ken ;) ;)

(https://s22.postimg.cc/5eo3i7vvx/IMG_1118.jpg) (https://postimg.cc/image/5eo3i7vvx/)

(https://s22.postimg.cc/5rfhogjbh/IMG_1120.jpg) (https://postimg.cc/image/5rfhogjbh/)

Title: Re: Boot Rubber
Post by: 59wagon on July 02, 2018, 04:57:42 PM

Hi Ken, yep as in the R/H side. I asked a question on installing this seal on the FB/EK forum a while back. There's some useful tips on how to do it if you want to follow the link: http://www.fbekholden.com/forum/viewtopic.php?f=26&t=22926&p=231889#p231889

Cheers,

John

Title: Re: Boot Rubber
Post by: ardiesse on July 02, 2018, 04:58:17 PM

Ken,

John just beat me to it.

Rob

Title: Re: Boot Rubber
Post by: Ken's 57 on July 03, 2018, 07:35:59 PM

Thanks John & Rob. Much appreciated. ;) ;)

FE-FC Holden Discussion Forum

Technical Board => Restoration Help => Topic started by: Ken's 57 on July 02, 2018, 04:25:09 PM