Print Page - Ute rear shocker covers

Title: Ute rear shocker covers
Post by: Norm on January 19, 2018, 03:07:33 AM

Can anyone help me?
I after the size of the two plates that are use to cover the access holes for the rear shockers upper mounts on a FC ute.

Title: Re: Ute rear shocker covers
Post by: hsv-001 on January 20, 2018, 08:39:48 AM

If they are [fairly sure] the same as the van then you are looking at square plates around 10# 112mm [4 1/2"] radiused corners close to the size of a 5cent piece with a 1/8" drilled centre and CSK screws if that helps .

Title: Re: Ute rear shocker covers
Post by: Norm on January 20, 2018, 09:45:28 AM

Thanks for the help!
I thought they were around that size, but I wanted to them to be correct!
Thanks again!

FE-FC Holden Discussion Forum

Technical Board => Restoration Help => Topic started by: Norm on January 19, 2018, 03:07:33 AM