Text only | Text with Images

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: MADDI0163 on September 12, 2017, 11:20:07 AM

Title: New to forum need heip hr front end in fc with red motor and aussie 4 speed what tailshaft ?
Post by: MADDI0163 on September 12, 2017, 11:20:07 AM
Sent from my SM-G930F using Tapatalk
Title: Re: New to forum need heip hr front end in fc with red motor and aussie 4 speed what tailshaft ?
Post by: freddyc on September 12, 2017, 02:47:27 PM
get one made, hardy spicer did mine. $200 if my memory is correct. they will tell you how to measure it.
Title: Re: New to forum need heip hr front end in fc with red motor and aussie 4 speed what tailshaft ?
Post by: Errol62 on September 12, 2017, 03:46:57 PM
EK Hydramatic. I think LC LJ.


Sent from my iPhone using Tapatalk
Title: Re: New to forum need heip hr front end in fc with red motor and aussie 4 speed what tailshaft ?
Post by: hsv-001 on September 14, 2017, 08:03:02 AM
That's correct LC-LJ should be 48" between uni. joints and should fit . I think EK auto is 49" .
Title: Re: New to forum need heip hr front end in fc with red motor and aussie 4 speed what tailshaft ?
Post by: Errol62 on September 14, 2017, 01:03:50 PM
Guess that is why my yoke is right up the box's coit. Good to know thanks Hayden.
Cheers
Clay


Sent from my iPad using Tapatalk
Text only | Text with Images