Print Page - rear brake circlip

Title: rear brake circlip
Post by: dwortho on August 15, 2017, 08:06:51 PM

Hi All

I'm after a couple of circlips that hold the brake cable ball in place for my two holdens.

any help will be appreciated.

Dave W

Title: Re: rear brake circlip
Post by: dwortho on August 16, 2017, 12:16:14 PM

sorry

Forgot to say i have fe's

Dave W

Title: Re: rear brake circlip
Post by: hsv-001 on August 17, 2017, 01:24:08 PM

If you are talking about the circlip that holds the front handbrake cable ball in the slide of your handbrake handle then all you need is to find a spring of the correct size and cut a circlip off it [one loop].

Title: Re: rear brake circlip
Post by: Errol62 on August 17, 2017, 04:58:20 PM

Or twitch up a bit of mig wire around it

Sent from my iPad using Tapatalk

Title: Re: rear brake circlip
Post by: dwortho on August 17, 2017, 09:01:22 PM

Thanks for your help guys.

I was using mig wire but hoped to get the proper circlip .

Cheers

Dave W

FE-FC Holden Discussion Forum

For Sale and Wanted => Parts Wanted => Topic started by: dwortho on August 15, 2017, 08:06:51 PM