|
Title: Valve Stems Post by: Old_Mt_Isa_Boy on April 21, 2017, 05:54:52 PM Hi does anyone have the 257mm valve stems.
Grey motor pushrod investigations I'm in Brisbane Qld. Thanks in advance Regards Wayne b Title: Re: Valve Stems Post by: hsv-001 on April 22, 2017, 07:55:16 AM Hey Wayne , did you mean push rods . If so I'll check in the shed today.
Title: Re: Valve Stems Post by: Old_Mt_Isa_Boy on April 22, 2017, 08:32:58 AM Thx
Title: Re: Valve Stems Post by: ardiesse on April 22, 2017, 10:47:14 PM Wayne,
I just got another set of pushrods last week, but only four of them are 257 mm long. But I pulled apart a couple of EJ motors 35 years ago and never threw anything out. It shouldn't be too much trouble to find twelve matching ones. That said, you can never be too careful. How would you feel about pulling your cam followers out and making sure they're the late FB to EJ type? Double-check the total height of cam follower and pushrod: it should be 264 mm from base of follower to top of pushrod, with the pushrod seated inside the follower. Rob Title: Re: Valve Stems Post by: Old_Mt_Isa_Boy on April 23, 2017, 08:24:49 AM Rob if you have 12 (even 6) that would be great.
Please PM with details. Regards Wayne |