FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: freddyc on February 16, 2017, 06:52:05 PM



Title: V6 conversion kit ????
Post by: freddyc on February 16, 2017, 06:52:05 PM
the green reverse light wire in the loom does it need to be fused or is it already fused in the loom?? This is the last wire to sort out before I turn the key.
fred


Title: Re: V6 conversion kit ????
Post by: mcl1959 on February 17, 2017, 05:01:43 PM
The green wire is not connected at either end. You will find the dashboard end of it close up near where it exits the A pillar near the screen. The other end is in the boot just above the wheel well where it exits the wiring loom.

Ken