I'm trying to get the wiper motor out. I'm having difficulty with the bracket that faces the firewall. Any Tip for the removal. Thanks in advance.
Nick
(https://s4.postimg.org/8zvfhggzd/image.jpg) (https://postimg.org/image/8zvfhggzd/)
Half inch open end, penetrant, dexterity and tenacity
Sent from my iPhone using Tapatalk
I have a feeling it's 7/16 that you need. But open end spanner is the way to go
Ken
👍
Sent from my iPhone using Tapatalk
Didnt think of taking off the whole bracket. ::)Was trying to get the clip off the back of the left hand side wiper arm. :(
There is no clip on the left hand side, there is a nut on the left hand side.
It's the same size as the nut at the centre of the bracket.
Ken
Thanks Ken,
You are a champion,
Nick