Print Page - Handbrake cable retaining clip

Title: Handbrake cable retaining clip
Post by: Wilcey on October 30, 2016, 10:47:17 AM

Hi all, after fitting a front handbrake cable to my 58' Ute I've noticed that the cable doesn't stay fitted to the handle. Do I need a clip or something to hold it in place?

Thanks,

James

Sent from my SM-G900I using Tapatalk

Title: Re: Handbrake cable retaining clip
Post by: zulu on October 30, 2016, 02:20:35 PM

Expensive bits on ebay has it, click the link below

http://www.ebay.com.au/itm/HAND-BRAKE-HANDBRAKE-CABLE-TO-SHAFT-CLIP-SUITS-FE-FC-FB-EK-HOLDEN-/172165160898

Title: Re: Handbrake cable retaining clip
Post by: hsv-001 on October 30, 2016, 04:46:22 PM

Just find a circlip and trim to suit .

Title: Re: Handbrake cable retaining clip
Post by: Wilcey on October 30, 2016, 06:03:35 PM

Jesus you're not wrong about expensive bits....

I'm waiting on the great FCRB28 (Pete) to see if he has any, if that fails I'll try the Circlip option.

Title: Re: Handbrake cable retaining clip
Post by: FCRB26 on October 30, 2016, 07:01:32 PM

will check when it stops raining
Was racking my brain on the way home as to what they are called they are E clips have a look at this a whole kits cheaper than eearlly bits
http://www.ebay.com.au/itm/300PCS-1-5-22mm-Kit-Car-E-Clip-Snap-Ring-Circlip-Retaining-Ring-Assortment-Set-/142146364439?hash=item2118956417:g:PAIAAOSwzaJX~hE~.
If i dont have one go to Specialised or CBC or hallite at berro .

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: Wilcey on October 30, 2016, 10:47:17 AM