Text only | Text with Images

FE-FC Holden Discussion Forum

Technical Board => Restoration Help => Topic started by: HoldenFE on July 28, 2016, 08:05:31 PM

Title: Holden FE Pin Assembly for the Brake Shoe Link
Post by: HoldenFE on July 28, 2016, 08:05:31 PM
Could anyone please advise whether the clip or the spring assembly should face the brake back plate.

The photos in the repair manual looks like the retaining clip faces the backing plate. Is this correct?

I took a photo before disassembly which showed the opposite to the above?

Any advise would be much appreciated.

Cheers,

David
Title: Re: Holden FE Pin Assembly for the Brake Shoe Link
Post by: FCRB26 on July 28, 2016, 08:42:19 PM
the clip faces the backing plate and spring goes outwards otherwise the spring assembly pushes the shoes off the backing plate.
Title: Re: Holden FE Pin Assembly for the Brake Shoe Link
Post by: FCRB26 on July 28, 2016, 08:58:48 PM
(http://uploads.tapatalk-cdn.com/20160728/21abea94e3508f2a785582e7e24a52c4.jpg)
(http://uploads.tapatalk-cdn.com/20160728/0182211843a8b9b197201b1cfe0a6cbc.jpg)


Does that help ?

Sent from my SM-G920I using Tapatalk
Title: Re: Holden FE Pin Assembly for the Brake Shoe Link
Post by: HoldenFE on July 28, 2016, 09:01:16 PM
Excellent, thank you so much.
Text only | Text with Images