Print Page - 0.002" undersize main bearings?

Title: 0.002" undersize main bearings?
Post by: ardiesse on July 08, 2016, 01:41:53 PM

Hi all,

I need to cure a case of noisy main bearings - does anyone have a set of 0.002" undersize mains for a grey motor?
ACL makes STD, 0.010", 0.020", 0.030" and 0.040" undersizes. I was hoping, with the aid of Flexgauge, to mix'n match standard and 0.002" undersize shells.

Thanks (in advance),

Rob

FE-FC Holden Discussion Forum

For Sale and Wanted => Parts Wanted => Topic started by: ardiesse on July 08, 2016, 01:41:53 PM