G'Day,
Is there any link to a post on the forum on how to replace the generator with an alternator including brackets and wiring?
Thanks, Wasim
Hi Tony, my Ute runs an alternator your welcome to have a look at the (grey motor)conversion.
cheers
Scott
Hi Wasim,
I have a primitive drawing that I could jazz up a bit showing all connections. I'm no electrician so the drawing is pretty basic and designed so I could follow it years later! I'll track it down and get back to you. I can recall it's for an external regulator setup.
Regards,
Martyn
Hi Wasim, these are pretty rough drawings I did about 25 years ago. Looks like I had 2 different types of alternators. No doubt some here will be able to make sense of what I did. I had no idea but they worked! Now that I look at them they seem less about a conversion than just a setup for red motor electrics. Not really sure if this will help but better i put them up and let you decide. Regards, Martyn
(http://i1287.photobucket.com/albums/a628/Crumpsnr/FC%20Wiring_zpshrikn3op.jpg)
(http://i1287.photobucket.com/albums/a628/Crumpsnr/FC%20Wiring_0001_zpsfkzglzj6.jpg)
This is a diagram I put together many years ago
(http://s22.postimg.org/p29i36j0t/image.jpg) (http://postimg.org/image/p29i36j0t/)
Ken
Thanks for the replies everyone.
I found this bracket on the web - looks OK - gives me the idea of what I need to do?
(http://i236.photobucket.com/albums/ff108/wasim59/IMG_1444_zpsjcwouzww.jpg) (http://s236.photobucket.com/user/wasim59/media/IMG_1444_zpsjcwouzww.jpg.html)
Regards, Wasim