Text only | Text with Images

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: Wasim on July 19, 2015, 04:49:48 PM

Title: vacuum booster
Post by: Wasim on July 19, 2015, 04:49:48 PM
Hello,
        I'm installing a vacuum brake booster with a standard grey motor and vacuum wiper set up. What is the best way to hook up the vacuum off a standard manifold?

Thanks, Wasim
Title: Re: vacuum booster
Post by: mcl1959 on July 19, 2015, 07:04:57 PM
The optional factory booster for a grey motor is teed from the same spot in the centre of the manifold where the standard vacuum line is attached.

This will be fine.

Ken
Title: Re: vacuum booster
Post by: Wasim on July 19, 2015, 07:30:13 PM
Thanks Ken.

Would it be OK to put the T section in the line near the fuel / vacuum pump?
Title: Re: vacuum booster
Post by: fastjbav6 on July 19, 2015, 09:00:36 PM
Booster hose should be plumbed at centre of manifold below carby.

Regards Seb
Title: Re: vacuum booster
Post by: Wasim on July 19, 2015, 09:03:25 PM
Got it - Thanks
Text only | Text with Images