FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: Glenn 'Stinky' Stankevicius on April 14, 2015, 03:06:16 PM



Title: EJ Wheel to HR Column
Post by: Glenn 'Stinky' Stankevicius on April 14, 2015, 03:06:16 PM
Has anyone tried this combo with a standard bench seat and if so was it OK/workable?


Title: Re: EJ Wheel to HR Column
Post by: Dr_Terry on April 25, 2015, 05:54:07 PM
EJ, EH, HD & HR steering columns are the same dimensionally & directly interchangeable. The horn ring & blinker switch are also all the same. The steering wheel will fit perfectly.

EJ boxes have the same ratio as FE-EK (14:1) while EH -HR are 16:1.

Dr Terry


Title: Re: EJ Wheel to HR Column
Post by: Glenn 'Stinky' Stankevicius on April 25, 2015, 07:10:41 PM
Thanks Doc!