Text only | Text with Images

FE-FC Holden Discussion Forum

For Sale and Wanted => Parts Wanted => Topic started by: fcv85l on January 11, 2015, 03:55:13 PM

Title: wantedpaint splitter rear qtr to beaver
Post by: fcv85l on January 11, 2015, 03:55:13 PM
wanted paint splitter mould for fc sedan below tail lamp to bumper on quarter panel to beaver
Title: Re: wantedpaint splitter rear qtr to beaver
Post by: fcwrangler on January 11, 2015, 06:21:43 PM
May have one in the shed, I'll check and let you know.
Jim
Title: Re: wantedpaint splitter rear qtr to beaver
Post by: fcv85l on January 12, 2015, 11:06:57 PM
thanks jim,,need the pair,goodluck in the shed
Title: Re: wantedpaint splitter rear qtr to beaver
Post by: DJ on January 12, 2015, 11:51:41 PM
A suggestion I received a while back was to use a piece of stainless door card trim.
The only reason I didn't was because Jim found a couple of these dividers first.
If I can find the one I had originally I'll let you know. Between us we may be able to make up a pair.
Title: Re: wantedpaint splitter rear qtr to beaver
Post by: fcv85l on January 13, 2015, 11:48:58 PM
thanks dj
Title: Re: wantedpaint splitter rear qtr to beaver
Post by: DJ on January 14, 2015, 12:55:50 PM
Found one (only one). The outside looks very good. The inside has putty that seems to scrape away easy enough. Parts of the old clips are all that remain. Pete (FCRB26) had some mounting clips he made a while back so it could be worth a message to him.
PM your address if you want, or try for a pair elsewhere.

(http://i1276.photobucket.com/albums/y472/davidbolton1/Untitled-2_zps9541bd57.jpg) (http://s1276.photobucket.com/user/davidbolton1/media/Untitled-2_zps9541bd57.jpg.html)
Text only | Text with Images