http://www.bangshift.com/forum/forum/bangshift/tech-section/32575-billet-electrical-firewall-connector (http://www.bangshift.com/forum/forum/bangshift/tech-section/32575-billet-electrical-firewall-connector)
I think I have made the classic mistake and should have installed something similar to the attached link particularly considering all of the extra wiring I have in mine. Anyone seen anything like it?
it just looks ugly now. Will be fixing it.
Regards
Wayne b
We just used a duetch 32pin plug with a heatshrink boot on the torana looks great.
(http://tapatalk.imageshack.com/v2/14/11/19/6d01139c3ee8e98c780da0add31ca7b0.jpg)
(http://tapatalk.imageshack.com/v2/14/11/19/73ee91f0343059f35196ef60af0d1a2a.jpg)
http://www.newark.com/deutsch/hdp26-24-31pe-l017/plug-hdp-31-pos-pin/dp/91R0967
I had a decent hole in the firewall as well.
Used a bit of rubber from Clark rubber to make a custom one. It was 10mm thick, and I cut a groove using a thin grinding wheel. Came up great!
Will try and get a photo if you would like one.
Cheers,
JB
The VT was a bitch in the fact there was no plug at the firewall.
Good idea Pete and use a backing plate to match the existing hole through the wall.
Thanks
Regards
Wayne b
But dont use the pins that come with the plug if you want 1 my bloke will get it in.
I have heaps of the right pins to use and will loan the bling crimpers.
Thanks Pete will let you know.
Regards
Wayne b
Pete, u will have to start your own online ordering system soon 😃