Print Page - Stud pattern

Title: Stud pattern
Post by: Gordon on November 09, 2014, 06:14:46 PM

Hi im making a bike trailer for my Nethew and want to use the spare FC wheels i have, what hubs fit the FC wheels HT or HQ or something else
Thanks Gordon

Title: Re: Stud pattern
Post by: FireKraka on November 09, 2014, 06:18:31 PM

Hi FC253
Mate the stud pattern changed after HR so you will need to use hubs up to HR if you want to use FC rims Torana stud pattern the same too.
Regards
Neil H

Title: Re: Stud pattern
Post by: FCRB26 on November 09, 2014, 06:29:50 PM

All the same up till HG after that it went quey ;)

Title: Re: Stud pattern
Post by: FireKraka on November 09, 2014, 06:35:08 PM

Hey Pete
Thanks for correcting that I wasn't 100% sure mate but knew they changed somewhere up around HT HG
Regards
Neil H

Title: Re: Stud pattern
Post by: Gordon on November 09, 2014, 06:45:24 PM

Thanks Pete, So the hubs they sell at auto spares for HT stud pattern will fit the FC rims

Title: Re: Stud pattern
Post by: mcl1959 on November 09, 2014, 06:56:47 PM

Absolutely

Ken

Title: Re: Stud pattern
Post by: FCRB26 on November 09, 2014, 08:05:35 PM

dont you have a fc drum front ends gordon? use the front hubs same thing.

Title: Re: Stud pattern
Post by: Gordon on November 09, 2014, 08:13:04 PM

I have 1 front end here, gave the other away, Didnt know I could use the hubs for a trailer ill pull them off and use them
Thanks

FE-FC Holden Discussion Forum

General => General Board => Topic started by: Gordon on November 09, 2014, 06:14:46 PM