Text only | Text with Images

FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: FC 304 wannabe on June 23, 2014, 07:20:27 PM

Title: remote boot release
Post by: FC 304 wannabe on June 23, 2014, 07:20:27 PM
Hi guys. ..
I'm after some advice.
I want to remove to boot lock mech for a cleaner look.
What system can I use to reliably open the boot ?
Thanks.
Shannon
Title: Re: remote boot release
Post by: FCRB26 on June 23, 2014, 07:28:26 PM
Vl commodore solenoid set up.
Title: Re: remote boot release
Post by: ekute on June 23, 2014, 10:36:00 PM
Or you could do the really cheap option like I did and use a choke style cable!
Title: Re: remote boot release
Post by: FC 304 wannabe on June 26, 2014, 11:45:04 AM
Cheap sounds good! ;)
Can I use the FC lock mechanism? or have to use something else...
cheers,
Shannon
Title: Re: remote boot release
Post by: NES304 on June 26, 2014, 03:57:57 PM
I'll be keeping an eye on this one. I've got a VT solenoid ready to go
Title: Re: remote boot release
Post by: FCRB26 on June 26, 2014, 04:22:33 PM
You would have to swap the mechanisms over so the latch is on the body and the fixed catch plate is on the boot otherwise you will need to run power or a cable into your hinged bootlid.

but shouldnt be to hard.
Title: remote boot release
Post by: NES304 on June 26, 2014, 10:08:24 PM
VT has the power to the bootlid with the solenoid which is where my wires lead right now...
Title: Re: remote boot release
Post by: Factory Custom on June 26, 2014, 10:28:10 PM
I tapped a thread through my boot lock centre, threaded a bolt in with a lock nut and a arm welded to that to turn it via the release cable. I also used a return spring to reset it,  plus mini gas rams to lift the bootlid up.  The problem with aftermarket gadgetry these days is they stuff up over time, I must have used a dozen new age boot releases before I went back to my tried and proven stock latch assembly. But then this is our driver so the boot is used regularly.

Title: Re: remote boot release
Post by: NES304 on June 27, 2014, 06:10:41 AM
Got a photo?
Title: Re: remote boot release
Post by: NickZ on June 27, 2014, 07:00:16 PM
I use a vs commodore cable, im just in the process of making a handle next to the front seat to pull up. but it does currently work well.
Title: Re: remote boot release
Post by: ekute on June 29, 2014, 05:43:51 PM
I just use the stock catch and lock mechanism without the exterior part of the lock because it is shaved. Although it is a bit stiff to pull the cable to open, it actually works.

If you open your boot and play with all the little lever thingies you will find the one which needs to be pulled up to release the catch. I can post a photo if you like.You would use the same whether you use manual or electric means!
Title: Re: remote boot release
Post by: FC 304 wannabe on July 07, 2014, 11:02:12 PM
Yes please mate..
Photos are good !!
Title: Re: remote boot release
Post by: NES304 on July 08, 2014, 06:29:34 AM
Quote from: FC 304 wannabe on July 07, 2014, 11:02:12 PM
Yes please mate..
Photos are good !!
x2
Title: Re: remote boot release
Post by: ekute on July 08, 2014, 08:36:24 PM
(http://i8.photobucket.com/albums/a48/ekv8ute/Mobile%20Uploads/IMAG0072_zps4194c18e.jpg) (http://s8.photobucket.com/user/ekv8ute/media/Mobile%20Uploads/IMAG0072_zps4194c18e.jpg.html)

Here's a photo of the back of my latch showing the lever which needs to be pulled to pop the latch.

The cable is set up to pull the lever towards the front of the car.

Sorry for crap phone photo but it was taken in situ!

Text only | Text with Images