|
Title: Warmaride Heater Fitting Instructions Post by: KFH on June 16, 2014, 08:10:40 PM I am looking for the fitting instructions for the above,recirculualtory type. I thought I had downloaded them some time ago from the Accessory of the week. I cannot find the file on my computer or in Accessories of the Week now. Can anybody help with this, in particular the position on the firewall.
Also has anybody have a picture of the adapt or that feeds the two outlets for the demister vents or is it a single outlet that splits in to a "Y" section to feed the two outlets up under the dash? Thanks Keith Title: Re: Warmaride Heater Fitting Instructions Post by: FCRB26 on June 16, 2014, 08:14:49 PM its a sheetmtal rectangle to y outlet
http://www.fbekholden.com/forum/viewtopic.php?f=4&t=14781 Title: Re: Warmaride Heater Fitting Instructions Post by: customFC on June 16, 2014, 11:32:12 PM Hey Keith
If you use the 'complete list' thread stuck to the top of the accessory of the week, it will list all accessories. Click on the pic and it will take you straight to the thread. Here's the link to the thread anyway. ;) Accessory of the week (43) - Nasco Heater Club Members only section!! Regards Alex Title: Re: Warmaride Heater Fitting Instructions Post by: KFH on June 17, 2014, 08:56:05 AM Thanks Pete and Alex, most helpful. Looks I'll have to manufacture the coupling for the demister hoses unless someone has an unwanted one lying around.
Keith Title: Re: Warmaride Heater Fitting Instructions Post by: FCRB26 on July 01, 2014, 11:39:13 AM Well that was fun (not)
Made to suit supercheap duct. (http://img.tapatalk.com/d/14/07/01/naty5ybe.jpg) (http://img.tapatalk.com/d/14/07/01/du6uquhu.jpg) (http://img.tapatalk.com/d/14/07/01/ry4atyhe.jpg) Title: Re: Warmaride Heater Fitting Instructions Post by: KFH on July 02, 2014, 07:00:34 PM Pete has worked his metal magic again. It looks like there is another item on his reproduction list. Looking forward to receiving it. Will go and get some of the Supercheap ducting now.
Thanks Pete. Keith Title: Re: Warmaride Heater Fitting Instructions Post by: FCRB26 on July 02, 2014, 09:06:15 PM I also cut 20mm thick lynotex rubber washers to slip over your under dash vents so the duct fits them snug too.
Pete Title: Re: Warmaride Heater Fitting Instructions Post by: DJ on October 22, 2014, 03:08:31 PM Well that was fun (not) Double "not" ........ should have called Pete. (http://i1276.photobucket.com/albums/y472/davidbolton1/1_zps02e08e93.jpg) ($2) Title: Re: Warmaride Heater Fitting Instructions Post by: FCRB26 on October 22, 2014, 08:05:53 PM Nice job well done.
Title: Re: Warmaride Heater Fitting Instructions Post by: DJ on October 22, 2014, 08:22:15 PM Thanks, they take some time.
|