Print Page - fitting new timing gears

Title: fitting new timing gears
Post by: fcee on June 08, 2014, 06:48:02 PM

Hi .recently a detailed post showed how to go about fitting new timing gears to a grey motor .can anyone tell me where I might find it ,cheers Steve . :)

Title: Re: fitting new timing gears
Post by: Trevor_B on June 08, 2014, 07:16:44 PM

Hi Steve,
Please check your email ;)

Cheers,
Trevor_B

Title: Re: fitting new timing gears
Post by: Harv on June 09, 2014, 07:27:46 AM

Here 'tis:

http://forum.fefcholden.club/index.php/topic,19642.0.html

Cheers,
Harv

Title: Re: fitting new timing gears
Post by: fcee on June 09, 2014, 06:26:04 PM

Thanks Guys, have had set of steel gears in the boot for a couple of years ,think it is about time they were fitted ,cheers Steve :)

Title: Re: fitting new timing gears
Post by: hsv-001 on June 12, 2014, 06:58:47 AM

Just note that when the gears are aligned ,the cam will be rocking TDC. on number 1# and you must turn the motor 180 degrees to put the dizzy in TDC. compression[firing] on 1#.As specified in the manual. Cheers Haydn

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: fcee on June 08, 2014, 06:48:02 PM