Text only | Text with Images

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: surferboy on May 19, 2014, 04:55:10 PM

Title: Diff ?
Post by: surferboy on May 19, 2014, 04:55:10 PM
(http://img.tapatalk.com/d/14/05/19/a6ypa9u5.jpg)

What have I got under the wagon ?
FC diff ?

Sent from my GT-I9505 using Tapatalk
Title: Re: Re: Diff ?
Post by: surferboy on May 19, 2014, 04:57:13 PM
Brakes ?

(http://img.tapatalk.com/d/14/05/19/ape8use6.jpg)

Sent from my GT-I9505 using Tapatalk
Title: Re: Diff ?
Post by: Stewy on May 19, 2014, 05:59:22 PM
Looks like FC to me.(original bump stops on the wheel arches)
But I am no expert  :)

Cheers Stewy   8)
Title: Re: Diff ?
Post by: philwreck on May 19, 2014, 06:10:22 PM
housing and brakes appear fc diff is later model evident by u/bolts on t/shaft .thus  you  would have better ratio,you can check ratio by looking on dust cover behind diff yolk.should be small stamped imprint.
Title: Re: Diff ?
Post by: FCRB26 on May 19, 2014, 07:51:43 PM
its a short bolt so can only be 3.55 or 3.36 (theres also a torana 3.89 with u bolts but i highlly doubt its one)
Title: Re: Diff ?
Post by: GOA350 on May 20, 2014, 08:26:51 PM
It's FC, you can tell by the wheel cylinders and the size of the brake fluid pipe on the diff.
Text only | Text with Images