|
Title: Rear divider mould Post by: DJ on November 29, 2013, 11:01:51 AM Still after a pair (or even one) of these elusive suckers. If anyone has come across any recently that they wish to sell I would love to hear from you.
Dave. (http://i1276.photobucket.com/albums/y472/davidbolton1/IMG_0350_zpsd0c37dcf.jpg) ($2) Title: Re: Rear divider mould Post by: hsv-001 on November 29, 2013, 08:11:37 PM I'm sure I have 1 somewhere but I used fe door card moulds on my van . I am in the process of putting a flash on the sides of my VW project and noticed that the later beetle side chrome strip [the thin one] is much the same profile and can be slid on over 6# self tapping screws will get you photos tomorrow . Cheers Haydn.
Title: Re: Rear divider mould Post by: DJ on November 29, 2013, 08:35:59 PM Thanks Haydn.
Title: Re: Rear divider mould Post by: FCRB26 on November 29, 2013, 09:20:29 PM Ill check my stash tommorow for you..
Pete Title: Re: Rear divider mould Post by: DJ on November 29, 2013, 11:26:44 PM Thanks Pete
Title: Re: Rear divider mould Post by: hsv-001 on November 30, 2013, 10:25:56 AM As I was saying last night , I have one original ,it seems to have a mark where the bumper has been pushed against it. On my van are FE chrome strips off the door cards [shown in photo]
(http://i1285.photobucket.com/albums/a589/hsv-001/SAM_0097_zps88c05c1f.jpg) ($2) they are easier to fit anyway .Also have 2 chrome offcut strips off late VW beetle which is the same profile that can be fitted directly over 6# self tapping screws or a piece of doorcard chrome strip . Which ever suits you. Cheers .Haydn (http://i1285.photobucket.com/albums/a589/hsv-001/SAM_0098_zps0517e130.jpg) ($2) (http://i1285.photobucket.com/albums/a589/hsv-001/SAM_0099_zps448695c9.jpg) ($2) (http://i1285.photobucket.com/albums/a589/hsv-001/SAM_0100_zps88015863.jpg) ($2) Title: Re: Rear divider mould Post by: DJ on November 30, 2013, 12:59:36 PM Haydn,
Thanks a lot. Will be back home tonight & reply. Leaning towards the 2 chrome off cut strips. Dave. Title: Re: Rear divider mould Post by: fcwrangler on November 30, 2013, 04:40:12 PM Dave, if you are still after a pair of the dividers,I did a clean up and found a set.
Jim Title: Re: Rear divider mould Post by: DJ on November 30, 2013, 08:15:00 PM Jim,
Thanks, please fwd details for payment. A photo would be great if possible. Dave. Title: Re: Rear divider mould Post by: DJ on November 30, 2013, 08:17:15 PM Haydn,
Many thanks for your help. I may have been exceptionally luck withe a couple on offer from Jim. I'll try of this original pair. Dave. Title: Re: Rear divider mould Post by: DJ on November 30, 2013, 08:18:14 PM Ill check my stash tommorow for you.. Pete Pete, I could be OK after all. Thanks. Dave. |