I have been requested to make seat belt mounts for a few people so if anyone else is chasing some here you go.
Water jet cut 65 x 45 3mm mild steel 8mm radius
7/16 UNF nut tigged on 2 sides.
Why muck around with flat bar.
8 bucks each
(http://img.tapatalk.com/d/13/05/15/u9uny5a8.jpg)
I have 50 in stock free delivery for 4 or more in a padded envelope.
I'll take 4 thanks Pete i need some for my rear outers, no rush send them with the air intake when you've got the time and i'll pay for the lot in one go.
Pedro
????????????????
WTF??
I can't find this in the Petey Catalogue. New item maybe? Page 14 :P
Hi Pete
I'll take 4 please mate do you want me to paypal to the details as before.
Regards
Neil
You have a PM Neil
I'll take 4 please Pete
Will they fit in the a pillar ?
Nick
These look the goods for sure and you're certainly reasonable on price Pete. Are these ones for a particular application? I thought minimum area was about 3750 square mm. Not criticising in any way, just wanting to clarify requirements. Regards, Martyn
Quote from: Crumpsnr on May 16, 2013, 08:43:47 PM
These look the goods for sure and you're certainly reasonable on price Pete. Are these ones for a particular application? I thought minimum area was about 3750 square mm.
Yeah im unsure on the legality,s of the size im just going off our local natzi engineer he required this size with NES,s car.
Quote from: Not Happy Jan on May 16, 2013, 08:34:09 PM
I'll take 4 please Pete
Will they fit in the a pillar ?
Nick
Nick they are pretty small should not be a problem.
Any feedback or changes are welcome as always not out for profit just making life easier for people.
Pete
G'day Pete, I will take 4 as well thanks. PM your details and I will EFT the money. Cheers, Graeme
Thanks Pete. My engineer wants a minimum of 3500 square mm. Go figure :)
Regards, Martyn
PS forgot to note, I've had a look at previous posts showing things you've done in the past and I think the service you provide with bits like this is just magic.
Martyn
Quote from: Crumpsnr on May 16, 2013, 09:58:14 PM
Thanks Pete. My engineer wants a minimum of 3500 square mm. Go figure :)
Regards, Martyn
Martyn sure it wasn't 350 square mm
All in... This is straight from my engineer and is latest specs on the plate. Although in the document there is no measurement for the B pillar plate. Send me your email if you want a copy
(http://img.tapatalk.com/d/13/05/17/jy3utudu.jpg)
Quote from: FC427 on May 17, 2013, 09:14:17 AM
Martyn sure it wasn't 350 square mm
Sorry was thinking in cm not mm,, :-[ :-[ :-[ :-[ :-[,
6.1 Seat belts may be adequately anchored to a steel floor pan, upper body or pillar by 7/16" UNF SAE Grade 8 bolts with a mild steel reinforcement backing plate. The reinforcement backing plate must have an area of not less than 3,750mm² (75mm x 50mm) in contact with the mounting surface and a thickness of not less than 3 - 4.5mm (1/8" - 3/16").
.......FC427......
Quote from: FC427 on May 17, 2013, 11:13:33 AM
Sorry was thinking in cm not mm,, :-[ :-[ :-[ :-[ :-[,
6.1 Seat belts may be adequately anchored to a steel floor pan, upper body or pillar by 7/16" UNF SAE Grade 8 bolts with a mild steel reinforcement backing plate. The reinforcement backing plate must have an area of not less than 3,750mm² (75mm x 50mm) in contact with the mounting surface and a thickness of not less than 3 - 4.5mm (1/8" - 3/16").
.......FC427......
Hey mate do you have a copy of that? Mine was form 3.6 Occupant seating.
My engineer obviously not looking there and I'll do 75x50 for the pillars with 65x45 everywhere else (unless easier for Pete for one size).
Bolt is not to go through the pillar like Frankenstein... (I hate that anyway)
Nes, if you've still got the commodore you wrecked just cut the b pillar ones out of that, that's what i did and my engineer is happy with it, after all they were designed by GMH to do the job.
Pedro
I'm with you NES, I don't like the Frankenstein look. I've got him and his family. My car came with 2 holes per pillar. I'll be putting in plates. Marty
Pedro, Car is gone. I kept the bolts and brackets as I stripped the car clean. I have a complete set of HT belts with the belt retainers etc and plan to have new webbing with commodore retainers...
WOW
A lot went on today LOL
Ill make any size you want ..
That pic should settle any arguments..
Quote "Spring washer may also be omitted if UNF nut is welded on"
From the engineer
Just out of curiosity what belts are everyone fitting to their FE/FC's these days???
I bought mine from an autobarn type of place, they are a universal retractable seat belt, just over a $100 each if i remember correctly.
Pedro
G'day Pedro, Do you know if they also sell / make universal rears - need to put 3 in the back of my wagon. Graeme
Yeah they have all types, I'm pretty sure it just depends on how you are mounting them, horizontal or vertical, I bought mine about a year ago so i'm not sure on all the details, i'll go and find the one still in the box and check.
Pedro
The ones i got are from a co. called APV, general purpose seat belt, retractable with a stalk,they have pics on the side of the box showing a few different types including lap sash, hope that helps.
Pedro
Thanks Pedro :-)
Graeme
Google ' Klippan seat Belts' and whole listing comes up with varying combinations of lap, lap/ sash, retractable.
They offer above parcel shell as well as below etc.
Cheers
Craig D
Will do Craig.
Full set of HT buckles with new webbing for me. Inertia not needed. ;)
Small price change as well.
$6 for postage because of the weight and OZ post putting their prices up had to happen.
For the earlly birds that ordered allready thanks very much all items have been shipped. Any problems please msg me.
Pete
I'll take a set but I'll PM you next week after pay day as I've already "splurged" this week with some new golf gear :D
Mine arrived yesterday thanks Pete 8), much easier than making them myself.
Pedro
;D
Does the cheesy grin mean they are all gone ?
Made more heaps here
G'day Pete, Do you have any more of your seat belt mounts? If yes I will take a set of 4. PM me your details so that I can send money. Cheers, Graeme
Just make sure you get the size that your engineer wants. My engineer changed his mind, so I changed engineer ;)
G'day Nes,
My engineer was happy with what he saw on here as far as Pete's stuff goes, so will take a punt....
How are things going with your best - will we see it at the nats?
Cheers,
Graeme
Going way to slow mate, I won't be at the Nats unfortunately :'( :'( :'( :'(
I'll have to get some more photos up soon
Ill send pm tonight
Do you have any b pillar seatbelt plates like the ones that were on eBay. I can get them other places but though id try you first. I got to cut the b pillar so I want to get rid of the old hole type.