Print Page - HR parts needed

Title: HR parts needed
Post by: Oggz on March 26, 2013, 07:50:01 PM

Hi guys,

Looking for a bench seat for a ute, I believe all HD/HR bench seats will fit.

Also looking for a gas ring to suit HR stock carby(1 5/32") to finish up the LPG install and make it at least look leagal... :P

Am on the gold coast

Cheers
Jemahl

Title: Re: HR parts needed
Post by: fb delivery on March 26, 2013, 10:06:35 PM

So wot happend with the bucket seats ??
i have some HR parts butt no seats at the moment

Rob
Toowoomba

Title: Re: HR parts needed
Post by: Oggz on March 26, 2013, 10:39:12 PM

cant find anyone do blue plate it for less than $300, bench seat $150.... I am way over budget as it is

Title: Re: HR parts needed
Post by: Glenn 'Stinky' Stankevicius on March 26, 2013, 11:22:43 PM

Quote from: Oggz on March 26, 2013, 07:50:01 PM
Also looking for a gas ring to suit HR stock carby(1 5/32") to finish up the LPG install and make it at least look leagal... :P

Jem, if you can send me some dimensions and/or pics I might be able to help with that one.

Title: Re: HR parts needed
Post by: Oggz on March 27, 2013, 10:40:04 PM

Bench seat located and fitted, managed to find on off gumtree of all places, great bloke, excellent condition $150.

Stinky, will do some measurements tomorrow and let you know, I take it OD of the top of the carby?(where air filter clamps to?), a height? and feed pipe ID? anything else?

Cheers
Jemahl

FE-FC Holden Discussion Forum

For Sale and Wanted => Other Stuff Wanted => Topic started by: Oggz on March 26, 2013, 07:50:01 PM