Print Page - fe front end

Title: fe front end
Post by: MRJ68 on March 24, 2013, 10:00:19 PM

Do i modify the old front end in the fe or do i put in one that is already modified . What do i do to beef it up
:-\ ???

Title: Re: fe front end
Post by: NES304 on March 24, 2013, 10:07:11 PM

DEPENDS...........What do you want?

Title: Re: fe front end
Post by: MRJ68 on March 24, 2013, 11:21:01 PM

looking to put hemi 265 or injected 3.3. or could end up with small block chev :-\ :)

Title: Re: fe front end
Post by: NES304 on March 25, 2013, 12:13:12 PM

Well an SBC is at least somewhat related... Prob leave the hemi to the chrysler boys

Modified HR front end Easiest for 3.3inj or custom front end from V6Conversions most common.

Title: Re: fe front end
Post by: mcl1959 on March 25, 2013, 09:09:27 PM

I doubt engineering would let a stock front end through. Ball joints are far superior to king pins.

Ken

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: MRJ68 on March 24, 2013, 10:00:19 PM