Text only | Text with Images

FE-FC Holden Discussion Forum

General => General Board => Topic started by: Glenn 'Stinky' Stankevicius on January 26, 2013, 06:54:58 PM

Title: Attention Station Sedan Owners (maybe PVs too)!
Post by: Glenn 'Stinky' Stankevicius on January 26, 2013, 06:54:58 PM
Asking for a favour if your Station Sedan is currently without it's roof-lining.

I need to confirm the distance between the roof ribs that have the little "spikey" tabs that are used to hold the two thinner wire ribs in place.
To be exact I need the measurement from the rear of the front "spikey" tab rib to the rear of the second "spikey" tab rib.
My Panelvan comes out at 74cms, I would expect the Station Sedans are the same but would appreciate confirmation.

Thanks in advance.
Title: Re: Attention Station Sedan Owners (maybe PVs too)!
Post by: colt on January 27, 2013, 09:26:38 AM
Hey Stinky. The same distance on my FE is 73.5 cms.

Colin.
Title: Re: Attention Station Sedan Owners (maybe PVs too)!
Post by: Not Happy Jan on January 27, 2013, 08:55:48 PM
I'll check out my wagon tomorrow and let you know if its the same as colt's fe
Nick
Title: Re: Attention Station Sedan Owners (maybe PVs too)!
Post by: spanner on January 28, 2013, 06:16:16 PM
My van is 720mm.
Graham
Text only | Text with Images