what pedal and cable would go into fc with red motor
Any pedal and cable will fit, if you have the patience and gasaxe skills ;D.
Only kidding - HZ fits OK, as does Commodore. The Guide below gives a step by step process for fitting Mitsubishi cables in a simple (bolt up) way.
http://fefcholden.org.au/forum/index.php/topic,20117.0.html
Cheers,
Harv.
There is also a thread on this site with pics of fitting a Commodore cable. Very easy once you have the mounting bracket sorted.
Ken
After modifying and fitting a VN pedal setup I had a look at a VR-S and the mounting bracket looks a whole lot easier.
Cheers
Craig D ( Build - Here we go again!!)
I have a VT setup which is quite good. Previous to that for my grey I had a Rare Spares one that fed the cable through and acted as a bonnet hinge bolt. I now no longer need the pedal and you can have it but I am using the rest of the cable.
I also have a full VS set of pedals with booster and brake master. I am wanting to sell them with my V6 and may be coerced into separating them.