Text only | Text with Images

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: NES304 on July 17, 2012, 08:25:34 PM

Title: The difference between an EK auto column and an EJ column?
Post by: NES304 on July 17, 2012, 08:25:34 PM
Can anyone tell me The difference between an EK auto column and an EJ column?
Title: Re: The difference between an EK auto column and an EJ column?
Post by: mcl1959 on July 17, 2012, 09:10:05 PM
The alloy casing at the bottom has different bolt holes - The EK is easier to bolt up than the EJ.

The EJ has a slightly better shift tube mechanism.

Ken
Title: Re: The difference between an EK auto column and an EJ column?
Post by: NES304 on July 17, 2012, 09:19:33 PM
thanks, will an FC wheel bolt straight on to an EJ?
Title: Re: The difference between an EK auto column and an EJ column?
Post by: mcl1959 on July 17, 2012, 09:30:39 PM
No

Ken
Title: Re: The difference between an EK auto column and an EJ column?
Post by: NES304 on July 17, 2012, 09:46:42 PM
If I change the top shroud part with the one off my FC column would it then fit?
Title: Re: The difference between an EK auto column and an EJ column?
Post by: mcl1959 on July 18, 2012, 09:12:55 PM
Yes anything can be done - it is more than a simple bolt up though.

Ken
Title: Re: The difference between an EK auto column and an EJ column?
Post by: NES304 on July 18, 2012, 09:32:33 PM
HOORAY, scored an EK column. Soooo much easier
Text only | Text with Images