Print Page - Measurement

Title: Measurement
Post by: JB on July 16, 2012, 05:52:01 PM

Hi Guys,

I need a measurement from someone who has a ute. In mm please from the bottom of the tailgate to the underside of the tailgate badge, so I stamp the ridge in the replacement skin.

Thanks in advance
JB

Title: Re: Measurement
Post by: REDMR2RED on July 16, 2012, 07:47:43 PM

There is no ridge on the ute tailgate. The badge fit onto the smooth panel.

Title: Re: Measurement
Post by: FCRB26 on July 17, 2012, 05:57:20 AM

I have a FE tailgate ill measure it tonight.

FB EK dont have the ridge FE FC do.

Title: Re: Measurement
Post by: Trevor_B on July 17, 2012, 04:44:55 PM

I'm with REDMR2RED on this one - no raised area under the tailgate badge on our FC ute either.

There is a raised area under the badge on a Wagon tailgate however.
Distance from bottom of wagon tailgate to underside of badge = 178mm as per the photo below (click on it for a larger image)

(http://s17.postimage.org/4cwnphg2z/tailgate.jpg) (http://postimage.org/image/4cwnphg2z/)

Distance from bottom of ute tailgate to underside of badge = 260mm in case this is helpful.

Cheers,
Trevor_B

Title: Re: Measurement
Post by: JB on July 17, 2012, 07:01:20 PM

Thanks for your input guys, I appreciate it.

JB

FE-FC Holden Discussion Forum

General => General Board => Topic started by: JB on July 16, 2012, 05:52:01 PM