Looking for some photos on how the front guards line up.
I am finding it difficult to get the upper rear to line up with the cowl panel.
Thanks
Craig D
Hi Craig,
there was some photos on the forum some time back in relation to the rear of the front gaurds. The problem (from memory) is that the original door rubbers had a tag that came out of the rubber and went underneath the bolts. If you don't have any insertion rubber or similar under your bolt hole points then it will be difficult to get it all to line up properly.
Keith
When I was a young lout, 'insertion rubber' had a completely different meaning...
Now that I'm an old lout, I know that Keith is right :)