thought i better wack a newish photo up .its changed a LOT in the last couple years hey.i would post heaps of pics but this took me so long to work out .hope it works ;D
(http://i273.photobucket.com/albums/jj231/waynos_01/2011-10-20191721.jpg)
slow but fun
(http://i273.photobucket.com/albums/jj231/waynos_01/2011-11-20224709.jpg)
(http://i273.photobucket.com/albums/jj231/waynos_01/2011-09-25164951.jpg) ::) 8) ::)
sorry 'bout the crappy phone pics..............
looks cool..
Pete
pete thanks so much,many people have said it to me but an fe/fc owner saying(or writing it) means about ten times more to me mate
thank you
ken
i have never posted the numbers for you,
here they are:
fc2106-7455m
351-651
256-2031
Old School COOL!!
Regards
Alex
alex,
you sayin its cool means a hundred times more............
thanks mate!
just needs some canted headlights etc ;)
G'day Wayno,
Can you put up a photo of your wheels for me please?
Where did you get your centre caps, and what sort of wheel nuts did you use?
I have some widies I want to use but they have no provision for hubcaps.
I did think about Torana GTR trim rings, centres and nuts but am looking at all options. ???
Cheers,
Gaz
Thanks for that Wayno - is that a blue pinstripe around the bonnet?
Ken
good spotting ken,
thats blue masking tape ,i am thinking about scalloping the bonnet,ran outta masking tape though haha
gaz,
the wheels are ht/g's,
got the rears widened to 7 inch,
the trim rings are from johns rod and custom,
and the centre caps i stole off my mates custom xp grille,
chopped down to suit.....(kept tellin him how much better the stock grill was till he changed and gave me the bullets.HAHA)
the wheel nuts are standard.
been tryin to find some chrome ones to na avail
thinking of laced candy red roof,dont think i'll go with the scallops.changes every week in my head( ARGH)
Thanks, Waynos.
I'll just keep lookin, lookin. ::)
Cheers,
Gaz.
Waynos, I got a set of chrome bullet wheel nuts from armadale auto parts; think they were about 50 or 60 bucks a set with 4 lockers and 2 sockets to siut the plain and lock nuts. can put a pic up if you want...
cheers, jack
jack,are the bullets long?
i have a set of bullets but are too long and look silly on the skinny fronts.
im after a bullet or domey sorta nuts that are relatively short.
have been everywhere in sydney lookin lookin,
everything i find i like is bloody metric
its hard to get anything i like in 7/16
have 3 sets of different sort of nuts
ended up putting original nuts back on
might just get these chromed
about 4 bucks each is what i was quoted
i think its too much
even thought of gettin some turned up outta stainless
which ever way i go its gonna be expensive
should just put the moon caps back on haha
they were only 20 bucks at a swap meet
why did i get moved??????????????????
i do understand,
but it is still very much a project under construction .
thats why i put it there.
it is not regoed and a whole lot of mods are taking place...............
Quote from: waynos on March 26, 2012, 04:13:47 PM
jack,are the bullets long?
not really; I'll measure them and get a pic for you tomorrow... My front rims are only 5 x 14; they look OK on these narrow rims. I used them to replace chromed closed 'flat-top' nuts; they only stick out about 1/2" more than the flat-top ones; maybe less, and they're more domed than pointy.
(but I usually run baby moons over them anyway...)
jack,
these sound like the ones i been lookin for........
a pic would be great mate thanks heaps
Waynos, these chrome nuts may stick out more than you'd like... When fitted, they are 41mm proud of the nut seat. From Armadale Auto Parts; go to their site, then 'Wheels Hubcaps and Accessories' then 'Hubcaps and Wheel Trims'... now $90 a set with 'installation kit' :o
They are more of a 'domed bullet' - no sharp point. Anyhow, some pics -
(http://i182.photobucket.com/albums/x198/jack_fc/IMG_1070.jpg)
(http://i182.photobucket.com/albums/x198/jack_fc/IMG_1072.jpg)
(http://i182.photobucket.com/albums/x198/jack_fc/IMG_1071.jpg)
cheers, jack
jack thanks mate
they are the closest thing to what i've been lookin for
thanks again
regards wayne
no worries, mate; if I helped out like this a hundred times over, I'd still be in debt to this forum and its members... :)
know what you mean ,i feel the same.my car would probably be on stands still if it wasn't for this forum 8)