Print Page - RATTLE IN GEAR LEVER IN 3RD GEAR

Title: RATTLE IN GEAR LEVER IN 3RD GEAR
Post by: graham_fuller on January 30, 2012, 07:54:05 AM

Hi All,
My gear lever has an annoying rattle in 3rd gear, i have replaced the selector lever rubbers but still there. When i lift the lever ever so slightly it stops. Any suggestions?
Cheers,
Graham

Title: Re: RATTLE IN GEAR LEVER IN 3RD GEAR
Post by: fcwrangler on January 30, 2012, 08:34:29 AM

Graham, could be a worn pin at the honeypot, try a bit of lube stick or grease on it.
Jim

Title: Re: RATTLE IN GEAR LEVER IN 3RD GEAR
Post by: mcl1959 on January 30, 2012, 08:44:23 AM

Also check that the spring is still in place in the end of the gearstick. Sometimes the spring falls out when you remove the gearstick and you dont notice it. This can create a rattle in the honeypot area.

Ken

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: graham_fuller on January 30, 2012, 07:54:05 AM