HI All,
I have just disassembled the drag link on the EH front end that I am going to put in the FC. when I pulled the cups out of the drag link there was bush inside the drag link, like a shim. My questions are, is the shim normally in there? and if not is an FC drag link the same as an EH one, as I have an FC front end here I could get the drag link from.
I have a rebuild kit from Rares & just want to do it once & do it right ;).
Dean.
There are originally 2 cup shaped shims in the draglinks - they are described as "covers" in the parts book. They are not included in the Rebuild kit as I believe they were considered unneccesary.
FC and EH drag links are the same. The only odd ones are FX/FJ which are longer.
Ken
Thanks Ken.
It looks like I will be busy tomorrow. ;D
Dean.
Quote from: mcl1959 on December 30, 2011, 05:20:44 PM
There are originally 2 cup shaped shims in the draglinks - they are described as "covers" in the parts book. They are not included in the Rebuild kit as I believe they were considered unneccesary.
FC and EH drag links are the same. The only odd ones are FX/FJ which are longer.
Ken
I know when I inquired about a rebuild kit I was told they didn't come with dust covers which I couldn't figure out where they belonged but now it makes sense.