Text only | Text with Images

FE-FC Holden Discussion Forum

Technical Board => Restoration Help => Topic started by: pbh0069 on December 13, 2011, 08:33:07 PM

Title: Wishbone Spacers
Post by: pbh0069 on December 13, 2011, 08:33:07 PM
Hi Everyone,

First time on here, and need some help. I'm reassembling my front end and need to acquire the wishbone spacers which are 3A5 and 3A6. Does anyone know where I can get them or does anyone know the dimensions so I can make a set?

Cheers, Phil
Title: Re: Wishbone Spacers
Post by: mcl1959 on December 13, 2011, 08:43:33 PM
You don't need them unless you are using NOS wishbones without the thread cut in them. Just set the wishbones up central on the crossmember and thread the nuts in.

Ken
Title: Re: Wishbone Spacers
Post by: pbh0069 on December 13, 2011, 09:04:20 PM
Thanks heaps Ken,will do that.
Great to go on a forum that responds so quick with helpfull advice.

Should have mentioned I'm rebuilding a FE Special Sedan which i got about six month ago,have already replaced the passanger front floor and now have cleaned and painted the front end, which is why the question was posted.

No doubt i will have plenty more questions as the rebuild continues

Once again thankyou

Cheers Phil.
Title: Re: Wishbone Spacers
Post by: fe350chev on December 13, 2011, 09:14:54 PM
I hope it all goes well Phil. It may be useful if you find time to look at some of the cars under construction.
Title: Re: Wishbone Spacers
Post by: pbh0069 on December 13, 2011, 09:16:52 PM
Will do when i get some free time over xmas break

thanks.
Title: Re: Wishbone Spacers
Post by: collecta on December 18, 2011, 08:59:05 PM
  Welcome to the forum Phil
cheers
Scott
Text only | Text with Images