Hi Guys, just wondering how they use the wiper washer block to spray the windscreen. I have the two blocks with tubes for the hoses however there are screws blocking what i believe would be the area for the sprayers. Is there something that should replace the screws. if so does any one have any or a picture of what they look like.
Regards brett
(http://s9.postimage.org/erf68q2cb/Wiper_Washer.jpg) (http://postimage.org/image/erf68q2cb/)
Here you go they come up ocassionally on Ebay. Here is a link to some discussion a couple of years ago.
http://fefcholden.org.au/forum/index.php/topic,17580.0.html
Regards
Wayne B
Thanks wayne. makes sense now.
Regards Brett
Brett,
This may help:
http://www.scribd.com/full/52759445?access_key=key-kxqe4whgmxhdfp90wj5
Cheers,
Harv.
Brett, type in wiper washer jets on ebay and you will find a couple of listings for fe/fcs, they say new stock around $50.
Regards Jim ps I will be ordering a set.
Jim,
The ones on ebay look to be a single peice. The ones on waynes message show a two piece.
Regards brett
Thats an old post it shows two different types.
Jim
The 2 piece unit with a larger hexagonal base followed by a smaller piece at right angles (as shown in the pic) is the real deal NASCO unit which is the most desirable set. The one piece is a later squirter that also works but is non genuine.
Ken