Print Page - Fitting Instructions FE Bonnet Wind Split

Title: Fitting Instructions FE Bonnet Wind Split
Post by: old's kool on November 06, 2011, 07:03:31 AM

Can anybody help me out with a copy of the fitting instructions for the FE Bonnet Wind Split / Chrome Ornament for bolt hole setout?

Thank you, Luke.

Title: Re: Fitting Instructions FE Bonnet Wind Split
Post by: graham_fuller on November 06, 2011, 08:03:41 AM

Follow the link to answer your question.
Cheers,
Graham
http://fefcholden.org.au/forum/index.php/topic,7289.0.html

Title: Re: Fitting Instructions FE Bonnet Wind Split
Post by: fcwrangler on November 06, 2011, 09:15:29 AM

If you can'nt get into the site, there is a fitting instruction sheet for sale on ebay under fc holden on page 12. If you enlarge the picture you can see the mearsurements needed.
Jim

Title: Re: Fitting Instructions FE Bonnet Wind Split
Post by: old's kool on November 06, 2011, 06:17:13 PM

Thanks for your help guys,

Graham, I can't use the link, it may be off limits to me, is it possible to email, or perhaps just describe the measurements required? Would you mind please? Thanks.

Jim, I saw the instructions on ebay and they are for the FC Hood Ornament different to the FE, Thanks.

Title: Re: Fitting Instructions FE Bonnet Wind Split
Post by: old's kool on November 07, 2011, 02:10:50 AM

All sorted, Thank you Wayne B.

[img]http://postimage.org/image/dokn2z2zr/[img]

FE-FC Holden Discussion Forum

Technical Board => Restoration Help => Topic started by: old's kool on November 06, 2011, 07:03:31 AM