Print Page - Rear Sway bars

Title: Rear Sway bars
Post by: Not Happy Jan on August 24, 2011, 09:22:51 PM

Just wanting to know if rear sway bars can still be purchased? and can they fit a wagon??
Nick

Title: Re: Rear Sway bars
Post by: FCRB26 on August 25, 2011, 11:42:01 AM

Anything can be made to fit i have seen a few commodore ones fitted with some moded bracketry ???

Title: Re: Rear Sway bars
Post by: 2door350 on August 25, 2011, 01:34:40 PM

I used a selby HR one from memory - i was quite beefy, maybe 20 odd mm, i put some right angle brackets on the frame rails in front of rear wheels and mounted it to them.....not too difficult, mind you i have since taken it back off and prefer the ride without it...i would use a very small one if i tried another

cheers

2door350

Title: Re: Rear Sway bars
Post by: FCRB26 on August 25, 2011, 08:19:17 PM

I ripped holes in my rails when i had a HR one on there ??? just get a decent shock over a sway bar i reckon?

Pete

Title: Re: Rear Sway bars
Post by: perth_ute on August 26, 2011, 06:11:16 PM

I bought front and rear from whiteline suspension. The result is amazing very stiff. They come with a mounting kit. I think the rear is 20mm and front is 28mm anyway the website tells you it all.

Title: Re: Rear Sway bars
Post by: Not Happy Jan on August 26, 2011, 06:55:54 PM

Thanks All
Might just get a good set of shocks as you say Pete

Title: Re: Rear Sway bars
Post by: FCRB26 on August 26, 2011, 08:28:00 PM

I ended up taking my rear sway bar out as our roads are horrible and it just made the ride rougher but when i fitted a good set of shocks i ended up cracking the top shock mount.. >:(

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: Not Happy Jan on August 24, 2011, 09:22:51 PM