Text only | Text with Images

FE-FC Holden Discussion Forum

General => General Board => Topic started by: FE_225 on March 28, 2003, 01:36:04 PM

Title: Camper bench seat.
Post by: FE_225 on March 28, 2003, 01:36:04 PM
Hi
Just wondering, with the layback/camper front bench seat for the FE/C, are these just a standard bench fitted with a hinge assy? Sorry if it sounds like a silly question, but I've never actually seen one.

Cheers
Tony
Title: Re: Camper bench seat.
Post by: Tony Galea on March 28, 2003, 03:42:44 PM
Yes Tony you are on the ball. You can lay back the seat to any position you like.
           Cheers Tony G
Title: Re: Camper bench seat.
Post by: Tony Galea on March 28, 2003, 03:46:50 PM
Sorry Tony forgot to log on
Title: Re: Camper bench seat.
Post by: mcl1959 on March 29, 2003, 09:56:33 AM
Tony, the lay back seat was not a factory option and was therefore always made from an original bench seat.
This involved removing the covers, cutting the frame, installing a hinge and release mechanism and then retrimming.  I have seen at least 5 different conversions so far - some a whole lot better than others.  The worst I have seen was a seat I just got which had pins you removed from under the seat and the back just falls down - no adjustment at all.

Ken
Text only | Text with Images