Hi guys,
Im wondering if somebody can point me int eh right direction for seam sealer.
On my current project (Datsun 1200) I need to seal some exterior seams which are visible.
I have tried various seam sealers for other repair and the sealer is elastic, paintable and has a finish like silicon. crap for exterior use good for underbody though.
In the past I have used a self levelling sealer which came in a small tube and was applied simply by finer and crept into joints and left an almost invisible paintable finish and you could smooth it up using thinners soaked rags.
I cant recall who made this latter product, or where I can get some. Most auto paint shops sell only the silicon or brush on style of sealer.
Can anybody recommend a good self levelling sealer? Hope fully one which does not require an expensive caulking gun to apply as my google research suggests most are 2 part epoxy sealers?
Thanks
Ed
nobody?
http://www.autobodystore.com/seamsealer.shtml
http://3mcollision.com/products/sealants
good stuff Paul, exactly what I needed.
Cheers
Ed
Great Stuff Paul,
Takes someone on the otherside of the world to tell us locals how to go about it ;D ;D ;D
regards
Weddo