Print Page - hr front end with uc brakes

Title: hr front end with uc brakes
Post by: ehholdenman on July 09, 2011, 08:34:23 PM

Hello all
Wanting to known if a uc torana caliper and hubs would fit on a hr stub axle and if so can i still run hr steering arms
Thanks for your help in advance

Title: Re: hr front end with uc brakes
Post by: mcl1959 on July 10, 2011, 05:24:39 PM

That is exactly how I built my FE. You need to carve a bit out of the upper wishbone for clearance on full lock, or weld in some longer bump stops which will reduce the turning circle.

Ken

FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: ehholdenman on July 09, 2011, 08:34:23 PM